Note: Boat can also be driven in Hot Springs AR for a limited time this summer if you are interested.
After owning and restoring my Mustang for about 10 years now, I’ve decided she just does not get enough use to justify keeping her.
I''ve replaced or have rebuilt so many items on this boat. Everything I''ve done has been at the recommendations of this community using the proper techniques and marine components. I’ve listed below all the new items starting with the major ones. Every original or extra piece I have is included with the sale, such as original gauges that need rebuilding, etc.
The engine runs strong and pulls great with the new ACME prop. It''''s amazing what these modern props will do, she hops right up on a plane.
The main thing this boat needs at the moment is a new interior. I have the fiberglass buckets from Tim that I never got around to reinforcing and covering. They are your''''s to finish. The engine cover vinyl is newer but I was planning on changing it once I decided what to do with the seats.
Feel free to PM or email me with any questions or comments.
Below is a link to my stringer rebuild as well as a link to my Flickr page with a photo history. I can take and send more pics as needed.
302 Holman Moody
New Items and Completed Projects:
Full Stringer Rebuild
Transmission Rebuilt by Eric at Fantastic Finish Marine
Resurfaced Heads and Valve Job
Electronic Dist Conversion, Mallory
New Timing Chain
New ACME prop
New Holley 4 Barrel
New Elderbrock Intake
New Spark Plug cables
New Plastic Gas Tank
New Battery Cables
New Trans Hoses
New Trans Cooler
New Water Hoses
New Fuel pump with filter
New Steering and Throttle/Trans cables
Optima Dual purpose blue top
Missing one of the CC emblems on the port side.
Trailer is original but has been modified by previous owner. He had the stop pushed back lightening the tongue weight and causing sway issues. I altered a bit to correct for that. Tires are 3 years old, radial Carlisles.